How to setup Moasure STICKUpdated a year ago
In this chapter, you will learn:
- How to change the measuring reference point
- How to insert your Moasure ONE in the foam-lined enclosure
- How to insert your smartphone in the clamp
- How to comfortably use the Moasure STICK when measuring
Changing the measuring reference point
By default, the measuring reference point is the sharp corner point on the device on the opposite face to the LED.
If you're planning to use your Moasure ONE along with the Moasure STICK, we recommend moving the measuring reference point to the nose of the housing in order to maintain the level of accuracy for your measurements.
To do this, please follow these steps:
Go to the "Settings" menu (tap the cog in the top right corner of the app);
Tap on “Measuring Options”;
Turn on “Use Moasure STICK Attachment”.
Inserting the Moasure ONE in the foam-lined enclosure
To place your Moasure ONE device within the foam-lined enclosure effectively, we highly recommend following these steps:
Hold the STICK upside down;
Insert the device making sure the LED is visible.
Note: please avoid holding the Moasure STICK by the handle because if you do, when you push the device into the housing it bends and stresses the flexible joint.
Inserting your smartphone in the clamp
To fit your smartphone in the clamp, push the phone against the adjustable edge and avoid trapping any of the buttons on your phone.
Adjusting the length of the STICK
To comfortably use the Moasure STICK, we recommend adjusting the length of it so that your hand is about waist height and your forearm is almost horizontal.