Most corners aren’t exactly 90 degrees, but if you want them to be, you can always use the ‘Square Up’ tool which will allow you to adjust angles in your drawing.

There are two options:

• Auto Square Up
• Manual Square Up

1. Auto Square Up option

You can use the ‘Auto Square Up’ option to automatically square up the drawing after a measurement is complete.

What will it do?

Corners that are almost 90 degrees will be adjusted to 90 degrees.

How can I turn on/off this feature?

You can turn on this feature by following these steps:

1. Tap on Settings;

2. Tap on Measuring Options;

3. Turn on/off the Auto Square Up option.

Can I change the strength of the Square Up tool?

Yes, you can! The higher the strength, the more likely a corner will be ‘straightened’ up to 90 or 180 degrees.

There are three different options:

• Low

• Medium

• High

2. Manual Square Up option

Alternatively, you can square up your drawing manually after your measurement is complete by following these steps:

1. Tap on Edit;

2. Tap on Square Up and select the strength (Low, Medium, High).

Remember… The higher the strength, the more likely a corner will be ‘straightened’ up to 90 or 180 degrees.